• Available in 2, 2.5 or 3 metre
• Available in Red only
• Open-ended
• Excludes 0.1 Litre Crack bottle

The crack bottle will not FILL the 2.5 or 3m SMB due to insufficient gas in the bottle.

This SMB is manufactured from lightweight polyurethane material.
It is supplied with a dump valve.
This offers an alternative to filling the SMB.

The Low Pressure Adaptor converts the DIN cylinder post on the SMB or DSMB to allow inflation with an inflator hose.

The adaptor allows divers to use their SMB abroad and are not wanting to travel with the mini-cylinder, or if they are diving where the gas saving and ease-of-deployment gained by utilising the mini-cylinder is less important to the dive-plan.

N.B. This adaptor can be used with any make of inflator hose.

The inflator stem does not include a locking-groove. This stops the hose from being attached to the SMB during inflation and thus there is no danger of any sudden increase in buoyancy to the diver. The hose will be connected only so long as it is held in place by the diver.